Akai MPK25 Operator's Manual download pdf (Page 22)

MINIMUM RANGE FIELD

MAXIMUM RANGE FIELD

MIDI PORT/CHANNEL FIELD

AFTERTOUCH PARAMETERS

For some applications, you might wish to use the knobs as Aftertouch controllers. In this scenario, the knob

will be transmitting Aftertouch information which could be used to control, say, a vibrato of a device that the

MPK25 is controlling. The following list of parameters can be accessed if “Aftertouch” is selected as the event

type for the selected knob.

MIDI CHANNEL FIELD

This field sets the MIDI Port and Channel which the knob will use to transmit

messages. You can assign knobs to one of two MIDI Ports, A or B, and to one

of 16 MIDI Channels on each port (i.e. A14). You can also assign a knob to use

the MIDI Common Channel.

1. Use the [<] button to select MIDI Port/Channel field.

2. While in MIDI Port/Channel field, use [VALUE] dial to select desired MIDI

Port and Channel.

3. Use the [>] button to select the next field.

Note: When not used via USB, only knobs assigned to port A will be

transmitted via the 5-pin MIDI port on the back of the MPK25.

MINIMUM RANGE FIELD

This field is used to specify the minimum value that the Aftertouch will transmit.

1. Use [<] or [>] buttons to select Minimum Range field.

2. While in Minimum Range field, use [VALUE] dial to select desired minimum

Aftertouch value.

3. Use the [>] button to select the next field.

MAXIMUM RANGE FIELD

This field is used to specify the maximum value that the knob can output.

1. Use the [<] or [>] buttons to select Maximum Range field.

2. While in Maximum Range field, use [VALUE] dial to select desired maximum

value.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

No comments

Akai MPK25 Operator's Manual Page 22