Akai MPC Renaissance User's Guide download pdf (Page 19)

11. Phantom Power Switch: This switch activates and deactivates phantom power. When activated,

phantom power supplies +48V to both Mic In inputs. Please note that most dynamic microphones do

not require phantom power, while most condenser microphones do. Consult your microphone's

documentation to find out whether it needs phantom power.

12. Phono In: Connect these RCA inputs to an external sound source (e.g., a turntable, CD player,

etc.). Make sure to set the Phono / Line Switch appropriately.

13. Phono / Line Switch: Flip this switch to the appropriate position, depending on the device

connected to the Phono In jacks. If you are using phono-level turntables, set this switch to Phono to

provide the additional amplification needed for phono-level signals. If using a line-level device, such

as a CD player or sampler, set this switch to Line.

14. Ground Terminal: If you connected a phono-level turntable to the Phono In jacks and are hearing a

low hum or buzz, this could mean that the turntable is not grounded. If the turntable has a grounding

wire, connect it to this terminal.

Note: Some turntables have a grounding wire built into the RCA connection and, therefore, nothing

needs to be connected to the grounding terminal.

15. MIDI In: Use a five-pin MIDI cable to connect the MIDI Out of an optional external MIDI device to the

MIDI In of MPC Renaissance.

16. MIDI Out: Use a five-pin MIDI cable to connect the MIDI Out of MPC Renaissance to the MIDI In of

an optional external device.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 218 219

No comments

Akai MPC Renaissance User's Guide Page 19