Akai PD-X2210I Operator's Manual download pdf (Page 21)

PRESS ENTER TO EDIT

TRANSPORT CONTROL

MESSAGE FORMAT

PRESS ENTER TO EDIT

EDITING TRANSPORT CONTROL

The MPD26 can be configured to send transport control information in a variety of ways: MMC (MIDI

Machine Control), MMC/MIDI, MIDI, or CTRL. Some applications and devices have dedicated MMC

functions and will only respond to MMC messages, while others may not have reserved MMC functions but

implement transport control via MIDI SysEx or MIDI CC messages. To account for these scenarios, we have

provided a way to edit the messages sent by the transport control buttons. This allows you to customize the

MPD26’s transport to work with your application or external device.

1. To edit transport control settings, press [EDIT] to enter Edit Mode.

2. Now select the transport control for editing by pressing [ << ], [ >> ],

[STOP], [PLAY], or [REC].

3. You will see Page 1 displayed on the screen (shown on the left).

4. Press [ENTER] to edit transport control settings.

5. When on Page 2, use the [VALUE] dial to select the format of the

transport control messages (MMC, MMC/MIDI, MIDI, CTRL).

6. Press [ENTER] to accept the change or [<] to cancel.

EDITING TAP TEMPO

Each Preset on the MPD26 can have a default tempo associated with it. Every time that the Preset is

loaded, the BPM setting will be loaded automatically.

1. To edit the default tempo, press [EDIT] to enter Edit Mode.

2. Now select tempo for editing by pressing [TAP TEMPO].

3. You will see Page 1 displayed on the screen (shown on the left).

4. Press [ENTER] to edit the default tempo for the current Preset.

5. On Page 2, use the [VALUE] dial to adjust the default tempo.

6. Press [ENTER] to accept the change or [<] to cancel.

BPM FIELD

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

No comments

Akai PD-X2210I Operator's Manual Page 21