GHOST Appendix A A.15
TTAASSCCAAMM DDAA--8888 RRSS--442222 ((LLTTCC)) ((UUssee SSoonnyy PP22 VVTTRR ))
AAddddiittiioonnaall HHaarrddwwaarree RReeqquuiirreedd
SY-88 Card fitted to DA-88
(Software version 2,03 or better)
Ghost to Sony 9-pin interface cable.
TTrraannssppoorrtt CCoonnttrroollss
All supported, machine sends back tallies.
LLooccaattee TToo TTiimmeeccooddee
Supported.
RReeccoorrdd EEnnaabbllee//RReehheeaarrssee
This function is supported by Ghost.
JJoogg//SShhuuttttllee
Supported.
SSeettuupp NNootteess
Tape must be formatted before use: this puts ABS-time onto the tape.
SY-88 Switch S1 #2: MIDI/9 PIN set to 9 PIN 1.
You may set the DA-88 to output timecode using the ABS-time or you may put a
timecode signal on the tape, in addition to the ABS-time, and use that instead.
Care must be taken in setting up timecode on the DA-88. There are two menus
that need to be set correctly. The ABS menu must be set to (P.in = tc)(even if
there is no timecode on the tape: the locate function will not work otherwise),
and the TC menu must be set to whichever code you are going to use (t.out =
ABS or t.out = Tc).See Tascam DA-88 and SY-88 Manual for more details.
Comments to this Manuals