Akai ALD1914HT Specifications download pdf (Page 8)

English - 48 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.

channels that you subscribe to. For more information, see “Conditional

Access” section

USB Input (functional in DTV mode only2.

Video Input is used for connecting video signals of external devices.Connect 3.

the video cable between the VIDEO IN socket on the TV and the VIDEO OUT

jack on your device.

Audio Inputs are used for connecting audio signals of external devices. 4.

Connect the audio cable between the AUDIO INPUTS on the TV and the

AUDIO OUTPUT jacks on your device.

Also to enable PC/YPbPr sound connection in such a case, use an

appropriate audio cable between the connected device’s audio outputs and

the TV’s audio inputs

Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable

you should also connect your device with an audio cable to the AUDIO

INPUTS of the TV to enable audio.

Headphone jack is used for connecting an external headphone to the system. 5.

Connect to the HEADPHONE jack to use headphones.

Power Connection

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

SPDIF

SCART

VGA

Coax.OUT

HDMI 1

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

No comments

Akai ALD1914HT Specifications Page 8