Akai AHC1400 Service Manual download pdf (Page 20)

● CENTER: Set the output level to LARGE, SMALL or OFF.

● REAR: Set the output level to LARGE, SMALL or OFF.

● SUBWOOFER: Set the output level to ON or OFF.

The centre and rear speakers can only be adjusted when 5.1CH is

set.

DIALOG

This option is only available when LT/RT or STEREO is set.

● Adjust the volume level of the centre speaker in a 2.1-channel audio

downmix.

DYNAMIC RANGE CONTROL

● Select the value (AUTO, ON or OFF).

Digital audio setup

DIGITAL OUTPUT

● Select SPDIF OFF to switch off the digital audio signal output.

● Select SPDIF RAW to set the digital audio signal output to its raw format

(DTS/Dolby Digital 5.1).

● Select SPDIF PCM to set the digital audio signal output to PCM format.

LPCM OUTPUT

This option is only available when SPDIF PCM is set.

● Select a sample rate for the digital audio output. There are two options,

48 kHz and 96 kHz.

Before switching this option off, check that the amplier connected

is compatible with 96 kHz digital signals.

Dolby digital audio setup

DUAL MONO

● Stereo: both channels as is. STEREO is the default setting.

● L-Mono: left channel only.

● R-Mono: right channel only.

● Mix-Mono: the average of both the left and right channel.

This function is only available for Dolby AC-3 encoded 2-channel

discs.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

No comments

Akai AHC1400 Service Manual Page 20