Akai AB-50 Specifications download pdf (Page 22)

RADIO OPERATION

The unit is designed to receive FM Stereo / FM and AM radio bands.

1. Slide the FUNCTION switch on the side of the unit to select RADIO mode.

2. Slide the BAND switch on the side of the unit to select FM ST , FM or AM band.

3. Adjust the TUNING knob on the side of unit to tune the frequency of desired radio station.

4. The tuning frequency will be displayed on the LCD display.

5. For the FM stereo mode, please slide the BAND switch to FM ST position. The FM ST. indicator will be

lighted up when the reception signal is strong.

6. For the FM mono mode, please slide the BAND switch to FM position. The FM ST. indicator will be

turned off.

7. For the AM mode, please slide the BAND switch to AM position.

AUX-IN OPERATION

Setting up (AUX-IN) connection

AUX-IN jack will allow you to connect external music player or external sound source to the main unit.

1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other

end (3.5mm jack) into the AUX- IN jack on the side of the unit.

2. Make sure your external music player is turned on.

3. Slide the FUNCTION switch to CD/USB/AUX position on the unit.

4. Start music playback on your external music player.

5. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit.

Remark:

The unit has built-in AM ferrite bar antenna, which can provide adequate reception in most

areas. If the AM reception is weak, try to adjust the location of the unit or relocate the unit

to improve the reception. If the FM reception is weak, try to adjust the length and the angle

of the FM antenna to improve the signal reception.

TO DEVICE PHONES

OR AUX OUT(LINE OUT)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Akai AB-50 Specifications Page 22