Akai AMP-45 Operations Instructions download pdf (Page 37)

Properly adjust the volume of the

corresponding channel.

Connect properly.

Problem

No sound

Sound distortion

Cause

Influenced by the outside element,

computer has problem.

The speaker terminal connects improper.

The sound doesn't

continue and the relays

has 'Di-Da' noise.

Screen displays

disorder or malfunction

The sound frequency in terminal wrong

connects or improper.

The power plug connects with the socket

improper.

The volume is too low.

Press the MUTE key on the panel.

The speaker terminal is short-circuited.

The amplifier input terminal wrong

connects.

The volume is too loud.

Using the speaker with the impedance less

then 8 ohm.

The volume is too loud.

The speaker terminal is short-circuited or

connected improperly.

Connect tightly.

Modified methods

Turn off the set, pull out the wire,

reinsert it then start the set again.

Check and connect the sound frequency

in terminal properly.

Connect the power correctly.

Turn the volume to the suitable position.

Press down MUTE key.

Cut off the power and connect the speaker

well, then start the power again.

Using the speaker with the impedance 8

ohm.

Adjust the volume to the suitable position.

Cut off the power and connect the speaker

correctly, then turn on the power.

16

TROUBLE SHOOTING

1 2 ... 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments