Akai AMP240 User Manual download pdf (Page 17)

AMP240

Troubleshooting7.

Trouble Action

No sound or incomplete audio Check if the random equipment are switched on and

set correctly.

Check cables for connection problems.

Check if the correct source is selected.

Check volume or mute setting.

No power Check if the power cord has been properly connected

to the power outlet.

Malfunction Should the appliance develop a serious malfunction,

unplug the appliance for 30 minutes. After this, power

on the appliance and restore to factory default.

Radio

Trouble Action

Noise or sound distorted Station is not tuned properly. Adjust tuning control.

on FM broadcasts Wire aerial is not positioned correctly. Extend the aerial.

FM stereo indicator does Selected station broadcasts in mono

not light Extend the aerial.

Station signal is too weak. Try other strong stations.

Trouble Action

No playback There is no disc inserted. Load a disc in the appliance.

Disc is loaded upside down. Place the disc with the

label facing upward.

Incorrect type of disc.

Disc may be damaged or dirty, clean the disc or try

another disc.

Moisture may have condensed inside the appliance.

Remove the disc and leave the appliance powered on

for one or two hours.

No sound or incomplete audio Select another audio track.

No scan or skip possible Some discs are programmed to refuse user action at

certain sections. This is no malfunction. Single chapter

or track discs do not allow skip function.

1 2 ... 12 13 14 15 16 17 18 19 20

No comments

Akai AMP240 User Manual Page 17