Akai mpd32 User Manual download pdf (Page 12)

NAVIGATING GLOBAL MODE

1. Press [GLOBAL] to enter Global Mode.

2. Use [<] and [>] to navigate through the available pages of options

(shown below).

3. Use the [VALUE] dial to change settings, values or select a message

on the selected page.

4. Press [ENTER] to accept the change or send a message or press [<]

to cancel.

NAVIGATING PROGRAM CHANGE MODE

1. Press the [PROGRAM CHANGE] button.

2. On Page 1, use the [VALUE] dial to select a Prog Change or

Prog+Bank message on and press [ENTER].

3. On Page 2, use the [<] and [>] buttons to move through the

different options and use the {VALUE] dial to change them.

4. Press [ENTER] to send the message.

GLOBAL MODE

In Global Mode, you can send

global messages and make general

changes to the way that your

MPD32 functions. Global Mode

options are organized under

different pages and include the list

of options shown below.

KILL MIDI Send an All Notes Off or Reset Controllers message Page 1

MIDI COMMON CHANNEL

Select which MIDI channel will be used as the

Common Channel.

Page 2

LCD CONTRAST Adjust the contrast of the display. Page 3

PAD SENSITIVITY Adjust how sensitive the pads are to the touch. Page 4

PAD VELOCITY CURVE

Adjust how the pads will output MIDI velocity, based

on the force applied to them.

Page 5

PAD THRESHOLD

Adjust the threshold of minimum force required to

activate a pad.

Page 6

MIDI CLOCK Select Internal or External MIDI Clock source. Page 7

TAP TEMPO AVERAGE

Select the number of taps to be averaged in

determining tempo.

Page 8

SAVE SETUP Save the current global settings. Page 9

SYSEX TX Transfer a Preset via SysEx. Page 10

VERSION Check the current firmware version. Page 11

PROGRAM CHANGE MODE

A Program Change, often referred to as a

Patch Change, is a MIDI message used for

sending data to devices to cause them to

change to a new program.

There are two different types of Program Change messages on the MPD32:

PROG CHANGE – This event will transmit a regular Program Change message (0-127) to your DAW or an

external device, allowing you to switch between 128 different program banks.

PROG+BANK – This event transmits a Program Change message (0-127), along with a Bank L (Least

Significant Bit) Change message (0-127) and a Bank M (Most Significant Bit) Change message (0-126),

which allows access of up to 16384 different program banks. You can use PROG+BANK if your DAW or

external device supports LSB and MSB.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Comments to this Manuals

No comments

Akai mpd32 User Manual Page 12

Comments to this Manuals

Related products and manuals for Audio Akai mpd32