Akai ATT01U Operations Instructions download pdf (Page 5)

BEFORE OPERATION

ASSEMBLY

Please install the accessory turntable on the main unit.

Hold the ribbon tape A which is attached to the

turntable belt B and loop the belt over the motor

pulley C. Be sure it does not twist.

o Pull the ribbon tapes A out of the turntable belt

p Place the mat on top of the platter.

q Remove the tie securing the tonearm.

r Remove the stylus guard.

CONNECTIONS

Before connecting the unit it is advised that you also

consult your current equipment instruction manual.

Note: Be sure to turn off the equipment before you make

changes to the different connections.

1. Connect the power cord to an AC outlet.

2. Connect the RCA cable to the PHONO input of your

AMPLIFIER.

Output terminals Amplifier(Receiver)

L (White) L Channel

R (Red) R Channel

NOTE: You can also use a line input by setting the phono

/ line switch at the rear of the turntable to line.

3. Connect PC via USB cord.

1 2 3 4 5 6 7 8 9 10

No comments

Akai ATT01U Operations Instructions Page 5