Akai MPC 60 Operator's Manual download pdf (Page 76)

Chapter 4: Editing Sequences

Page 70

MIDI channel 6, for example. The contents of the five fields in this

section apply only to the track (1 of 99) that is selected in this field.

• The Status field:

This is a choice field with two options:

1. UNUSED: The track number displayed in the Track field will

not be initialized. Instead, it will be set to an unused state (as

when power is turned on), which requires the least amount of

memory. However, if this track is later recorded into, it will

immediately be initialized to default values.

2. IN USE: The track number displayed in the Track field will be

initialized to the values entered in the Type, Pgm and Chn

fields.

• The Type field:

The Type field for the selected track will be initialized to the option

selected in this field (DRUM or MIDI).

• The Pgm field:

The Pgm field for the selected track will be initialized to the option

selected in this field (1-128 or OFF).

• The Chn field:

In this field enter the output MIDI channel (1-16 or OFF) and port (A-D) to

which the selected track will be initialized, using the same data entry

method as for the Chn field in the Play/Record screen. To the right of this

field is another field for the auxiliary MIDI output channel assignment.

• The <Do it> soft key:

After values for all the fields have been entered, press this soft key to

initialize the sequence.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 240 241

No comments

Akai MPC 60 Operator's Manual Page 76