Akai MPC 60 Operator's Manual download pdf (Page 68)

Chapter 3: Recording Sequences

Page 62

that MIDI channel here. When <Proceed> is pressed, this track number

will have its Type field set to DRUM.

• The <Proceed> soft key:

When all of the above fields have been entered, press this soft key to

initialize the selected sequence and move on to the second Record 16

Channels screen:

======== Record All 16 Channels =======A

Seq: 1-Sequence⁄name BPM:120.0 (SEQ)

Sig: 4/ 4 Bars: 1 Loop:OFF

========================================

While holding RECORD, play ext sequencer

with MIDI clock.

===== Now:001.01.00 (00:00:00.00) ======

<Done>

This is the screen in which the actual recording will take place. The

selected sequence has now been initialized to contain one bar of the

time signature entered in the previous screen. The first 16 tracks have

been assigned to MIDI channels 1 through 16, as described above. All

tracks have their Type assigned to MIDI except for the track number

specified in the Drums on ch field in the previous screen, which has been

initialized to DRUM.

The fields and soft key are:

• The Seq field:

This field shows the sequence number that was entered in the previous

screen. In this screen it is for display only and cannot be changed.

• The Sequence Name field (Seq: 1-SEQ01

in the above example

screen):

This is the selected sequence’s name. It can be changed in the same

manner as the Sequence Name field in the Play/Record screen.

• The Tempo Display Mode, Active Tempo, and Tempo Source fields:

These three fields operate exactly as their counterparts in the

Play/Record screen do.

• The Sig field (time signature):

This field shows the time signature entered in the previous screen. It is

for display only and cannot be changed.

• The Bars field

This shows the total number of bars in the newly initialized sequence,

which is always initialized to 1 bar. When recording begins, additional

bars will be added to the end of the sequence as needed, as is normal

when the Loop field is set to OFF in the Play/Record screen.

• The Loop field:

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 240 241

Comments to this Manuals

No comments

Akai MPC 60 Operator's Manual Page 68

Comments to this Manuals

Related products and manuals for Synthesizer Akai MPC 60