Akai MPC 60 Operator's Manual download pdf (Page 224)

Appendix

Page 218

Technical Specifications of Akai MPC60

General

• Display: 320 character (240 x 64 dot graphic) LCD

• Disk drive: 3.5 inch DD (793KB formatted)

• CPU: 80186 @ 10MHz

• Dimensions: 495(W) x 127(H) x 471(D) mm

• Weight: 10.5 kg

• Power requirements: 100 VAC (50/60Hz)/30W; 120VAC (60Hz)/32W;

220VAC (50Hz)/30W; 240VAC (50Hz)/30W

Sound Generator

• Sampling rate: 40kHz (frequency response: 20Hz–18kHz)

• Sampling capacity (mono): 13.1 seconds standard; 26.2 seconds with

750KB sound memory expansion option (EXM003).

• Data format: 16-bit A/D and D/A converters; samples stored in special

non-linear 12-bit format for much lower noise than 12-bit linear

systems

• Maximum sounds in memory: 128

• Number of sound programs: 8

• Sound assignments per program: 64

• Simultaneous voices: 16

Sequencer

• Maximum notes: 60,000 (512 KB)

• Timing Resolution: 96 parts per 1/4-note (ppq)

• Sequences: 99

• Tracks per sequence: 99

• MIDI output channels: 64 (16 channels x 4 output ports)

• Song mode: 20 songs, 250 steps per song

• Drum pads: 16 (velocity and pressure sensitive)

• Drum pad banks: 4

• Sync modes: MIDI Time Code, MIDI clock, FSK 24, SMPTE and 1/4

Note Click. SMPTE frame rates supported are 24, 25, 29.97 drop and

30.

Rear Panel Inputs/Outputs

• Record input sensitivity: (HI gain) -65dBm, 45kΩ; (MID gain) -45dBm,

45kΩ; (LO gain) -27dBm, 45kΩ

• Stereo output level: -3dBv, 600Ω

• Level of 8 individual outputs: 0dBv, 600Ω

• Echo send mixer output level: -1.5dBv, 600Ω

• Echo return input level: -3dBv, 10kΩ

• Headphone output (MPC60-II only): 1

• Sync/Trigger input level: 0.5V p-p – 1V p-p

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 240 241

Comments to this Manuals

No comments

Akai MPC 60 Operator's Manual Page 224

Comments to this Manuals

Related products and manuals for Synthesizer Akai MPC 60