Akai MPC 2000XL User Manual download pdf (Page 7)

Gently push down each of the tabs on the scsi port to prepare for the

scsi ribbon cable connection. Note the wide white ribbon cable located

above the scsi port. There will not be much room to connect the scsi

ribbon cable, so some scsi cable-twisting and very careful maneuvering

will be necessary on your part. Take your time when performing this

task.

Note, the power cable (red and white wire) that originate from the

mainboard. Because our sampler had a zip drive, shown there is a

molex connection (starting where electrical tape is, green shrink-tubing,

and ends at molex connector). The molex connector (black and red

wire) will provide 5V to the flash card drive.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

Akai MPC 2000XL User Manual Page 7