Akai MPC 2000XL User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
Copyright 2011 MPCStorageSolution.com All rights reserved.
Slide compact flash drive thru opening such that the bezel (front of
drive) is flush with the front of the MPC sampler. When you have done
this, you will see 2 holes line up with holes on the sampler. Fasten the 2
screws to secure the flash card drive.
Place bottom-cover back on and fasten all screws. Turn over
MPC2000XL to look at your newly-installed internal scsi compact flash
card reader/writer drive. Connect the power cord to the sampler but do
not turn on just yet. Insert the compact flash card and turn on the
MPC2000XL. Look at the card reader and you will notice the green LED
is lit on the right-hand side. If you see a red light condition, then this
means there is a connection that is not completely connected. Check all
connections. When the sampler completes booting up with OS 1.14,
you can then do a SHIFT LOAD and cycle thru the scsi ids to confirm
Page view 12
1 2 ... 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments