Copyright 2011 MPCStorageSolution.com – All rights reserved.
the male molex connector to the main board power (female
molex
connector) as shown in the picture below.
Next, connect the
male
molex connector to reader/writer drive’s
power connector (female molex connector). Also connect the other
end of the scsi ribbon cable into compact flash drive’s scsi/ide board
(see picture below). This board allows the ide compact flash drive to
convert to scsi and connect to the internal scsi port. The board has a 40
pin interface (ide) and a 50 pin interface (scsi). This board is the most
important and valuable part of the compact flash drive kit. Without this
board, it would not be possible to convert an ide-based flash drive for
scsi application.
Comments to this Manuals