Akai MPC 2000XL Operator's Manual download pdf (Page 110)

Chapter 6: Creating and Editing Sounds

Page 99

Fine Adjustment of the Start Point

Select the St: field and press OPEN WINDOW to open the Start fine window.

........................

......................................................................................................

........................................................................................................

............................

CLOSE PLAY XZOOM+ZOOM-

Start fineStart fine

 Start: 7859

 Lngth= 433597

Smpl Lngth:VARISmpl Lngth:VARI

PLAY X:ALLPLAY X:ALL

• Start:

Set the start point. Change the value with the DATA wheel or enter a number with the

numeric pad and press ENTER.

• Lngth=

The length of the sample (from the start point to the end point) is displayed. You cannot

change the value of this field.

• Smpl lngth:

This sets a fixed point of either the end point or the length of the sample.

VARI When the start point is changed, the end point remains fixed and the length

of the sample changes.

FIX When the start point is changed, the length of the sample remains fixed and

the end point moves.

You can enlarge or reduce the sample wave display by pressing ZOOM+ [F3] or ZOOM- [F2].

Press ZOOM- [F2] to display the entire wave and set a rough start point then press ZOOM+[F3]

several times to make fine adjustments.

When PLAY X [F6] is pressed, you can play back the currently selected sound at full velocity

according to the settings in the PLAY X: field. For details refer to “TRIM Mode” on the previous

page.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 207 208

No comments

Akai MPC 2000XL Operator's Manual Page 110