Akai RE32 Operator's Manual Page 95

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 94
Version 1.00 85
SINGLE-MACHINE EDITING
To select the whole track to nudge, press and hold SYNC then press IN and OUT together. This
will mark the whole of the selected track and it will be highlighted green on the external monitor.
You may, of course, have multiple tracks selected for editing.
However you mark it, as soon as you press the DATA ENTRY + or - keys, the selected audio will
slip forwards or backwards in increments of one frame or press +/- keys while holding the SHIFT
key down to slip in smaller increments of sub-frames (however, please see below - NUDGE SET
- as you can set the increments by which the audio will be nudged). If you are in the middle of a
cue, as soon as you nudge it, the cue will be split and the audio slipped.
UNDOING A NUDGE
You cannot undo a nudge directly within the NUDGE pages but, when you leave the page, if you
feel the result was unsuccessful, you may undo it. When in the NUDGE page, if you feel an edit is
not working well, leave NUDGE temporarily, hit UNDO and re-enter NUDGE to have another
attempt.
NUDGE SET (SHIFT+NUDGE)
The NUDGE key’s shift function, SET, allows you to set by how much the +/- keys will nudge.
Pressing SHIFT+NUDGE (F3) will display this screen:
The fields on this page are:
DATA +/- KEYS Here you may set the amount the DATA +/- keys will nudge. The usual
selection (and hence the default) is 1 frame. You may select from 1-25
frames (or 24 or 30 depending on the frame rate of the timecode type
you are using).
SHIFT+DATA +/- KEYS This field allows you to set the amount by which the DATA +/- keys will
nudge when the SHIFT key is held at the same time. The default is 1
sub-frame and you may select from 1-9 sub-frames.
Pressing EXIT will leave this screen at any time.
Page view 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 191 192

Comments to this Manuals

No comments