Akai RE32 Operator's Manual download pdf (Page 60)

50 Version 1.00

INPUT ROUTING

INPUT ROUTING - DD1500

The selection of input routing options on the DD1500 depends very much on the options you have

installed in the system. In a basic system with no ADCs connected (I.e. the only inputs you have

are the digital inputs A and B), the default assignment would be:

DIGI A L/R

DIGI B L/R

TO TRACKSINPUTS

If you add one DD1500a to the system with just two stereo analogue inputs, these would be

automatically assigned as

TO TRACKSINPUTS

ADC 1L

ADC 1R

ADC 2L

ADC 2R

The digital inputs A and B may also be assigned if you wish but, in this case, the analogue inputs

would take priority in the routing.

Of course, should you add more inputs (be they digital or analogue), the system will assign them

automatically for you but you may re-assign them as you wish.

With this default setting, you may record using a normal 4- or 8-group output track laying mixer

and assign mixer channels to tracks from the mixer just as you would with a normal MTR with no

need to worry about having to set any special input routing. However, if you do wish to route inputs

within the DD1500, this is also possible.

When a DD1500 is selected on entry to the ROUTE INPUTS pages, the screen will display

something like this:

This shows the default routing in a system with no analogue inputs, only the standard digital inputs

A and B.

This shows the default settings for a system fitted with a DD1500a comprising one AD4 analogue

input board.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 191 192

No comments

Akai RE32 Operator's Manual Page 60