Akai RE32 Operator's Manual Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
48 Version 1.00
INPUT ROUTING
INPUT ROUTING - DR16
pro
When a DR16pro is selected on entry to the ROUTE INPUTS pages, the following screen will be
shown:
This shows the default routing in a system with analogue inputs selected. If the DR16pro has an
optional multi-channel digital interface installed (AES/EBU or ADAT), you can select between
ANALOGUE or DIGITAL inputs 1..8 using the DATA ENTRY +/- keys when the cursor is over the
INPUT TYPE field.
Inputs may also be routed to tracks using the cursor up/down/left/right keys to move to a matrix
point. You then use the DATA ENTRY +/- keys to assign or de-assign accordingly. For example, to
route the right channel of the DR16pro’s built-in stereo digital interface (DINR) to track 6, move the
cursor to 6 using the cursor right key and use the cursor down key to select DINR. The cursor
looks like this and shows you where you are.
The cursor is shown and the track number is highlighted.
To route this input to the selected track, press the DATA ENTRY+ key. You will see this screen:
This shows that DINR is now routed to tracks 6.
To route inputs to tracks 9..16, use the SCROLL VIEW keys to view tracks 9..16.
The RESET (F6) key may be used to restore the default routing (input 1 goes to track 1, input 2
goes to track 2 etc..).
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 191 192

Comments to this Manuals

No comments