Akai RE32 Operator's Manual download pdf (Page 54)

44 Version 1.00

RECORDING

PUNCH MODE This selects how the system will respond if the record track selections

are changed while the transport is in record.

Available selections are :

NORMAL This is the default setting. The record track selections can not be changed

while the transport is in record.

TRACK KEYS In this mode, the transport responds in the same manner as a

conventional MTR. Pressing the REC and PLAY keys will put the system

into a ‘record-ready’ condition waiting for tracks to be punched in from

the track select keys. If no tracks are selected at the time the REC and

PLAY keys are pressed, the REC key will flash. In this condition, when

any of the track select keys are pressed the system will punch into record

on the selected track(s) and the REC key will light steadily. When a track

select key is pressed again, that track will be punched out of record.

PRIMED In this mode, recording will start immediately on selected tracks when

the REC and PLAY keys are first pressed. After this, if new record tracks

are selected, the appropriate track select key(s) will flash indicating that

the track is in ‘record-ready’, but recording will not actually start until the

PLAY key is pressed again while holding down the REC key. While in

record, pressing the track select key of a track that is actually recording

will punch that track out of record and back into the ‘record-ready’ state.

NOTE: The TRACK KEYS and PRIMED punch modes are only available on 8 track machines

(e.g. DD8, DD8plus). The PUNCH MODE parameter is not shown on this screen if other

machines are being used in the system.

Press EXIT at any time to leave this page and return to the main RECORD screen.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 191 192

No comments

Akai RE32 Operator's Manual Page 54