Akai RE32 Operator's Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
22 Version 1.00
INTRODUCTION
JOG WHEEL
The jog wheel allows you to ‘scrub’ audio much like reel-rocking on a conventional tape recorder.
You may jog all tracks simultaneously. Normally, maximum jog speed is 1 x play speed but you
may set this to be as much as 5 x maximum play speed. More conveniently, perhaps, you can set
it so that normal operation gives a maximum jog speed of 1 x play speed but, when the SHIFT key
is held, you can jog up to 5 x play speed.
The jog wheel can also act as a ‘spool’ function and the jog wheel then sets the speed and direction
of playback. Maximum spool speed can be set to 5 x play speed.
You may also use the jog wheel to ‘scroll’ through a project very quickly. In this case, all you are
doing is ‘sliding’ the GRID on the VGA monitor, allowing you to get to points ‘off screen’ very
quickly. In this case, no audio is heard.
JOG, SPOOL and SCROLL are selected using the JOG/SPOOL key. This selects whether the jog
wheel described below ‘scrubs’ audio, spools audio or scrolls through the project. When the JOG
LED is on, the jog wheel will scrub audio. The jog wheel is always active, even in play, so that you
can just grab the jog wheel and start editing straight away.
When SPOOL is on, the jog wheel will spool audio.
When both LEDs are on, you can scroll through the project very quickly and no audio will be heard
but this does allow you to get to points in the project very quickly.
When both LEDs are off, the jog wheel has no function. This position is recommended when
mixing down so as to prevent accidental jogging during playback.
JOG/SPOOL SET
By pressing SHIFT+JOG/SPOOL, it is also possible to set maximum jog and spool speeds. You
will see this screen display:
The fields are:
JOG LIMIT This may be set to a maximum of 5 x play speed. If you only occasionally
require jogging to be greater than play speed, it is recommended you
keep this field set to 1 x play speed and use the SHIFT+JOG functions
described next.
SHIFT+JOG LIMIT This allows you to set the maximum jog speed when pressing SHIFT
plus the jog wheel together. Maximum speed is 5 x normal play speed
(although 2 x normal play speed is probably the most useful as the audio
is still fairly intelligible).
SHIFT+JOG is very convenient when editing because you can use the
jog wheel for normal jogging (JOG LIMIT set to 1 x PLAY SPEED - see
above) to find edit points, etc., and use SHIFT+JOG when you need to
whiz through audio to the next edit you wish to make.
SPOOL LIMIT This allows you to set the maximum spool speed which is 5 x play speed.
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 191 192

Comments to this Manuals

No comments