Akai RE32 Operator's Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
6 Version 1.00
INTRODUCTION
REAR PANEL
In this section, we take a look at the RE32’s rear panel connections. Actual operation of the RE32
will be discussed later.
DISPLAY
This connects to any standard S-VGA monitor such as you would use with any PC. You will probably
have bought a monitor with the system as supplied by your dealer but, if not, any reputable computer
store will be able to sell you one. Any monitor should be able to be used but there are many
monitors of different quality available (usually reflected in the price!) and some may not give as
good results as others. For example, some may have a particular blue, red or green bias to them,
others may not have particularly clear colour contrast and may appear ‘hazy’ or not have a particularly
sharp focus. Other monitors can be sometimes show a faint image of screen items twice resulting
in a ‘ghosty’ image that is difficult to read (especially text). If you are buying a monitor and have
any doubts, please contact your dealer who will no doubt be able to recommend a suitable monitor.
Any size monitor may be used and the graphics automatically resize accordingly. You may even
use very large RGB monitors but you will need a suitable S-VGA to RGB converter for this. Again,
please speak to your dealer for information on choosing and connecting a monitor.
KEYBOARD
This mini DIN socket will accept a PS/2 compatible PC keyboard and is provided to make the
naming of files easier.
EXPANSION CONNECTION
This connector is used to attach the optional RC15 User Assignable Remote Controller.
AKAINET
This takes a standard BNC Ethernet cable and is used to connect the RE32 to other machines in
the system. You may use the cable provided but, if longer lengths are required, any reputable
computer store should sell BNC Ethernet cables in a variety of lengths.
If you choose to use a cable other than the one provided, please make sure it is a high quality one.
If there are any problems with the cable or the BNC plugs, you will have communications problems
and erratic and unreliable performance.
TERM
This switches termination for the AKAINET connection on or off.
SIGNAL GND
This can be used to overcome ground loops in a complex system.
MAINS INPUT
Mains power is connected here.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 191 192

Comments to this Manuals

No comments