Akai RE32 Operator's Manual Page 107

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 106
Version 1.00 97
EDIT TOOLS
Pressing BUTT (F2) on the main CROSSFADE TOOLS page gives you this screen:
METHOD Selects the method by which the BUTT is to be achieved .
With TRIM selected, one or both of the cues will be extended; this
assumes that the cue in question has a handle available for extension.
Note that the targeted cue turns yellow, while the passive cue stays
green.
SLIP (F2) selects SLIP as the method, which means that either the
PRE or the POST cue (not BOTH) is actually moved along the timeline.
SLIP IN can also be selected from within the TRIM page by pressing the
IN key while pressing SHIFT. Similarly, OUT + SHIFT selects SLIP OUT.
SLIP mode is clearly dangerous if working to picture, hence the cues in
question turn red in warning. Note that, when SLIP is selected F3
becomes active as SLIP? and toggles between slipping just the cue or
the entire track.
ADJUST Selects which point(s) is to be adjusted:
PRE (F4) Selects the PRE point for adjustment.
POST (F5) Selects the POST point for adjustment.
BOTH (F6) Selects both PRE and POST points foradjustment.
Having set the required parameters, press the EXECUTE key to proceed.
Pressing FADES (F3) on the main CROSSFADE TOOLS page takes you to the MODIFY FADES
screen in which you have individual adjustment of the PRE and POST fade characteristics:
The parameters on this page are:
LEVEL Adjusts the overall level of the selected cue
TIME Determines the length of the fade.
CURVE Sets the curve characteristic.
Page view 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 191 192

Comments to this Manuals

No comments