Akai S3200XL Instruction Manual Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
56 Troubleshooting MESA II
Troubleshooting
Check that the Editors and PlugIns that you want to
use are in the "MESA Pouch" Folder, and this Folder
resides in the same directory (location) as the MESA
II application.
If you run an older Mac System OS than v 7.5, check
whether you have the necessary extensions in-
stalled. Details are given in the Memory, Systems
Requirements and Set-Up sections in this manual.
If you do not have these extensions, you will have
to upgrade your Mac Operation System.
Delete the "MESA Preference" Folder from the Pref-
erence Folder in the System Folder. If you boot
MESA II, a new "MESA Preference" Folder will be
automatically created.
Reinstall MESA II.
Set the unique SCSI ID numbers to each device
connected via SCSI.
The conflicts (collision) in SCSI in initial routines
are caused because both the Mac and Samplers
are equally SCSI targets and SCSI initiators when
they are turned on at the same time. To avoid the
conflicts between multiple SCSI devices, you should
turn on the external SCSI devices like the Sampler
first and let them settle before turning on your Mac.
You might need to remove the terminator of a built-
in hard disk as there is a terminator on the SCSI
card in the Sampler.
If you use S2800 , S3000, S3200 and CD3000, you
must have at least v1.68 or later version system
softwares.
If you use SCSI, check if the SCSI cables are con-
nected securely.
If you use OMS MIDI, check if the OMS setup has
been set correctly, and if the MIDI cables are con-
nected properly.
When the SCSI is used, turn off the virtual memory,
including RAM doubler, in the Memory Control
Panel.
Check if the boot-up routines and SCSI setups are
appropriate. Be sure to set the correct SCSI IDs.
Troubleshooting
Symptoms
MESA II does not boot
Suspected Cause
The file is not in the correct loca-
tion.
The Mac freezes
Necessary extensions are not in-
stalled.
Preference file of MESA II is cor-
rupted.
The file is corrupted.
Several devices use the same
SCSI ID.
The cable is not connected
SCSI termination problem
The virtual memory is on.
The Mac and Sampler booted si-
multaneously.
Old version Sampler
SCSI ID setup problem
No access to external
devices
Page view 61
1 2 ... 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments