Akai S1000 Series Operator's Manual download pdf (Page 89)

Page 76

Chapter 4: Editing Sequence

• The Loop field:

In this field enter the loop status (OFF or TO BAR) and the loop bar

number, if TO BAR is selected, for the initialized sequence.

The “Track” section

• The Track field:

Any or all of the sequence’s tracks can be initialized. To enter the

settings for each track, first select the track number in this field,

then enter the initialization data for that track in the fields below.

The contents of the five fields in this section apply only to the track

(1 of 99) that is selected in this field.

• The Status field:

This is a choice field with two options:

1. UNUSED: The track number displayed in the Track field

will not be initialized. Instead, it will be set to an unused

state (as when power is turned on), which requires the

least amount of memory. However, if this track is later

recorded into, it will immediately be initialized to default

values.

2. IN USE: The track number displayed in the Track field

will be initialized to the values entered in the Type, Pgm

and Chn fields.

• The Type field:

The Type field for the selected track will be initialized to the option

selected in this field (DRUM or MIDI).

• The Pgm field:

The Pgm field for the selected track will be initialized to the option

selected in this field (1-128 or OFF).

• The Chn field:

In this field enter the output MIDI channel (1-16 or OFF) and port

(A-D) to which the selected track will be initialized, using the same

data entry method as in the Chn field in the Play/Record screen. To

the right of this field is another field for the auxiliary MIDI output

channel assignment.

• The <Do it> soft key:

After values for all the fields have been entered, press this soft key

to initialize the sequence.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 275 276

No comments

Akai S1000 Series Operator's Manual Page 89