Akai S1000 Series Operator's Manual download pdf (Page 211)

Page 199

Chapter 10: Syncing to Tape and Other Devices

Regardless of which sync mode is selected, there is one soft key in

the Sync In section:

• The <SyncIn=ON > soft key:

Pressing this soft key turns the sync input on or off. The soft key

text shows the current state. If ON, the MPC3000 always stands

ready to sync to the incoming sync signal. If OFF, incoming sync

signals are ignored.

The Sync Out section

The right side of the Sync screen contains all settings related to

using the MPC3000 as the source of sync signals. The MPC3000 can

send three types of sync signals:

• FSK24, output from the Sync Out jack whenever a sequence or

song plays

• MIDI clock, output from any one of the four MIDI output ports

• SMPTE, output from the Sync Out jack only while no sequence or

song is playing and only while the SMPTE Generation screen is

showing

There is one field and one soft key on this side of the screen:

• The MIDI sync field:

This choice field determines which of the four MIDI output ports (or

none) will send MIDI clock and Song Position Pointer signals. The

options are OFF, OUT A, OUT B, OUT C or OUT D.

• The <GenSMPTE> soft key:

Pressing this soft key displays the screen that’s used to generate

SMPTE time code:

============ Generate SMPTE ============

Start=00:00:00:00 Frames/Sec:30

========================================

This screen permits SMPTE time code to be generated from

the SYNC OUT jack. It can only be generated while this

screen is showing. It is not generated while the MPC3000 is

playing. The fields and soft keys are:

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 275 276

No comments

Akai S1000 Series Operator's Manual Page 211