Akai S1000 Series Operator's Manual download pdf (Page 150)

Page 137

Chapter 7: The MIXER/EFFECTS Key

3. Rotate the data entry control. Turning it will rotate through ten

selections:

[-] The pad’s sound has no output assignment

1 The pad’s sound is sent to individual output 1

2 The pad’s sound is sent to individual output 2

3 The pad’s sound is sent to individual output 3

4 The pad’s sound is sent to individual output 4

5 The pad’s sound is sent to individual output 5

6 The pad’s sound is sent to individual output 6

7 The pad’s sound is sent to individual output 7

8 The pad’s sound is sent to individual output 8

E The pad’s sound is sent to the internal effects

generator

If the sound being adjusted is a stereo sound, then the available

selections are different:

[-] The pad’s sound has no output assignment

[ ] The left side of the sound is sent to individual output

1 and the right side is sent to individual output 2

[ ] The left side of the sound is sent to individual output

3 and the right side is sent to individual output 4

[ ] The left side of the sound is sent to individual output

5 and the right side is sent to individual output 6

[ ] The left side of the sound is sent to individual output

7 and the right side is sent to individual output 8

[E] Both sides of the sound are sent to the internal

effects generator

Notice that the screen displays pad numbers, yet the mixer contains

data for each of the 64 note number assignments (35-98) in the

active program. For each pad number on the screen, the data shown

is from the note number (35-98) within the active program to which

the pad number is currently assigned (in the MIDI key, option 1

screen). If you want to be able to adjust mix data by selecting a

specific note number regardless of its pad assignment, use the All

Mix Data (Text) function, accessed by selecting option 3 from the

initial MIXER/EFFECTS key menu.

COMMENT: The data values used for this mixer are nor-

mally taken from the active program. Because of this, when-

ever the active program is changed, the newly selected

program’s individual output assign and mix settings will

immediately become active. However, it is also possible to use

settings from the active sequence so that each newly selected

sequence will have its own custom settings, or to use a single

master set of individual out assignments and mix data so

that the settings never change when either the program or

sequence is changed. This choice may be made in the Mixer

Source Select fields, accessed by pressing option 4 from the

MIXER/EFFECTS key menu.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 275 276

Comments to this Manuals

No comments

Akai S1000 Series Operator's Manual Page 150

Comments to this Manuals

Related products and manuals for Recording Equipment Akai S1000 Series