Akai S1000 Series Operator's Manual Page 135

  • Download
  • Add to my manuals
  • Print
  • Page
    / 276
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 134
Page 122
Chapter 6: Creating and Editing Programs
assignments. These fields are used to play one of three
sounds depending on the velocity of the note received:
1. If the received note’s velocity is less than or equal
to the value in the first If over field, then only
the sound selected in the Sound field plays.
2. If the received note’s velocity is greater than the
value in the first If over field but less than or
equal to the value in the second If over field,
then only the note number selected in the first
use field plays.
3. If the received note’s velocity is greater than the
value in the second If over field, then only the
sound assigned to the note number selected in the
second use field plays.
(The second If over field is limited to values at
least one higher than the first If over field.)
In the above example, if you hit pad A01 softly you’ll hear
the Soft snare sound. Hit it harder and you’ll hear the
Smack snare. Hit even harder and you’ll hear the Goliath
snare.
COMMENT: If you only want to switch between 2
sounds, then select the same note number in both
use fields and use the first If over field to set the
threshold.
COMMENT: Regardless of which pad plays, the
individual program parameter data (tuning, enve-
lope, velocity data, etc.) for each of the three note
numbers are used but only the main note numbers
mixer data (mix volume and pan, output assignment,
and output/effects mix level) are used. The advan-
tage of this is that it is only necessary to adjust the
volume and pan, for example, of the main sound in
the mix instead of all three sounds.
4. DCY SW (decay switch):
This option permits one of three sounds to play depend-
ing on the value of the Decay field in the “Envelope,
Velocity, Tune...” screen. However, if any drum notes
contain Note Variation decay data, it will override the
Decay field’s for that note only. (The Envelope, Velocity,
Tune... screen is accessed by pressing the PROGRAM/
SOUNDS key and selecting option 2.)
If selected, the screen appears the same as if the VEL
SW
option above were selected, except that in this case
one of three sounds will play depending on the current
envelope decay setting instead of the note’s velocity
setting:
Page view 134
1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 275 276

Comments to this Manuals

No comments