Akai DPS16 Operator's Manual download pdf (Page 80)

Chapter 6: Mixer Function (Mixer Mode)

➸

NOTE :

The number of AUX SENDs you can use simultaneously varies depending on the sampling rate

setting. The number of effects you can use simultaneously is also affected in the same way. If the sampling

rate is 32kHz, 44.1kHz, or 48kHz, you can use up to four AUX SENDs (and effects). If the sampling rate is

96kHz, you can use up to two AUX SENDS (and effects). For more information on the Project’s sampling

rate setting, see page 24 and 106.

■ EQ ON/OFF

You can turn the channel EQs on and off.

Range: ON/OFF

➸

NOTE :

The Projects’ sampling frequency setting affects the number of the EQs you can use simulta-

neously. If the sampling frequency is set to 32kHz, 44.1kHz, or 48kHz, you can use the EQs on up to 16

channels. If the frequency is set to 96kHz, you can use the EQs on up to 6 channels. For more information

on the Project sampling frequency, see page 24 and 106.

✐

TIPS :

• You can also use the

[INPUT SELECT]

keys (INPUT MIX channels) or the

[TRACK SELECT]

keys

(TRACK MIX channels) to turn the EQs on and off.

• If you wish to apply EQ to a recording signal, use the EQ on the INPUT MIX channel that inputs the

signal.

■ EQ HIGH F/EQ MID F/EQ LOW F (EQ frequency)

You can set the center frequency for each EQ band.

Range: HIGH: 500Hz–18kHz, MID: 200Hz–8kHz, LOW: 40Hz–1.5kHz

✐

TIP :

You can also use the QLMC knobs on the top panel to control the center frequencies. See page 19

for more information.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 197 198

No comments

Akai DPS16 Operator's Manual Page 80