Akai HV 10 Operator's Manual download pdf (Page 4)

CAUTION (Only for the product sold in Canada and U.S.A.)

To prevent electric shock, do not use this polarized AC power plug with an extension cord, receptacle, or other outlet

unless the blades can be fully inserted to prevent blade exposure.

14-En

ATTENTION

Afin d’éviter tout risque de décharge électrique, n’ utilisez pas cette prise polarisée avec une rallonge, une prise

de courant ou autre sortie á moins que les lames puissent être complétement insérées et qu’elles ne soient plus

visibles.

14-F

IMPORTANT (for U.K. customers only)

This equipment is fitted with an approved converter plug.

To change the fuse in this type of plug proceed as follows:

1) Remove the fuse cover and old fuse.

2) Fit a new fuse which should be a BS1362 5 Amp A.S.T.A. or BSI approved type.

3) Refit the fuse cover.

If the AC mains plug fitted to the lead supplied with this equipment is not suitable for your type of AC outlet sockets,

it should be changed to an AC mains lead, complete with moulded plug of the appropriate type.

If this is not possible, the plug should be cut off and a correct one fitted to suit the AC outlet. This should be fused

at 5 Amps.

If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

PLEASE NOTE: THE SEVERED PLUG MUST BE DESTROYED TO AVOID A POSSIBLE SHOCK HAZARD

SHOULD IT BE INSERTED INTO A 13 AMP SOCKET ELSEWHERE.

The wires in this mains lead are coloured in accordance with the following code:

BLUE —NEUTRAL

BROWN —LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings

identifying the terminals in your plug, please proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or

coloured RED.

DO NOT CONNECT ANY WIRE TO THE PIN MARKED E OR

OR COLOURED GREEN OR YELLOW &

GREEN WHEN WIRING THE PLUG.

Ensure that all the terminals are securely tightened and no loose strands of wire exist.

Before replacing the plug cover, make certain the cord grip is clamped over the outer sheath of the lead and not

simply over the wires.

6F-En

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE

COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

32-En

VENTILATION

Do not prevent the unit’s ventilation, especially by placing the unit on the soft carpet, in a narrow space,

or by placing objects on the unit’s chassis—top, side, or rear panels. Always keep the unit’s chassis at

least 10 centimeters from any other objects.

31C-En

WARNING

1 2 3 4 5 6 7 8 9 ... 42 43

Comments to this Manuals

No comments

Akai HV 10 Operator's Manual Page 4

Comments to this Manuals

Related products and manuals for Processors Akai HV 10