Akai HV 10 Operator's Manual download pdf (Page 31)

OUT: It is used to transmit the System Exclusive data to the external Sequencers (refer to

System Exclusive).

MIDI RECV (Receive)

Move the cursor to the lower line and switch the parameter using the Cursor buttons.

[Prog]

OFF: The Program Change information is ignored.

BASE: The Program Change is received on the MIDI channel set at Base in MIDI SYSTEM.

OMNI: The Program Change is received regardless of the MIDI channel.

[Note]

BASE: The MIDI Note-On information is received on the MIDI channel set at Base in MIDI SYSTEM.

OMNI: The MIDI Note-On information is received regardless of the MIDI channel.

[Zone L], [Zone H]

Specifies the range of MIDI Notes (Low and High) received. The Notes can be specified from

the external MIDI keyboard.

[Ctrl]

ON: The Control Change information is received.

OFF: The Control Change information is ignored.

[Pedal]

OFF: The Pedal Control message is ignored.

Base: The Pedal Control information is received on the MIDI channel set at Base in MIDI SYSTEM.

OMNI: The Pedal Control information is received regardless of the MIDI channel.

The Control Change Numbers assigned to the pedals are as follows.

Control Change Number 80: PROGRAM A

Control Change Number 81: PROGRAM B

Control Change Number 82: BYPASS

The Main Parameter (Key, Style, Voicing and Chord) and Sub Parameter (Key, Style, Voicing

and Chord) can also be switched using the Pedal Control message.

MIDI SEND

Move the cursor to the lower line and switch the parameter using the Cursor buttons.

[Prog]

OFF: The Program Change information is not transmitted.

BASE: The Program Change information is transmitted on the MIDI channel set at Base in MIDI

SYSTEM.

[Pedal]

OFF: The Control Change message is not transmitted.

BASE: The Control Change message is transmitted on the MIDI channel set at Base in MIDI

SYSTEM.

TUNE ADJUST: 427 ~ 453 (default value: 440)

Sets the tuning of the DecaBuddy itself. When the Tone is set to ON, the tone signal of the

selected pitch is available from the OUTPUT terminal.

EDIT Mode

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

No comments

Akai HV 10 Operator's Manual Page 31