Akai HV 10 Operator's Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 43
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
22
[- -] No Pitch Correction applied.
[1 ~ 9] Corrects the pitch of the harmony based on the reference pitch set in TUNE ADJUST. It is used
to correct the off-key vocal. The higher the value, the more the correction, renders more mechanical
sound.
RAND.DELAY (Random Delay): - -, D1 ~ D9. R1 ~ R9
Adds harmony the delay effect.
[- -] No delay effect applied.
[D1 ~ D9] Normal Delay, the ordinary delay of the fixed delay time.
[R1 ~ R9] Random Delay, its delay time changes at random. The timing of harmony changes at
random, rendering more natural harmonies.
In the normal delay and random delay, the higher the value, the longer the delay time.
For the unison voice, only the random delay is applied.
SOLO Function
In EDIT mode, you can send the sound of the specific part to the output.
In VOICE parameter (LEVEL, PAN, etc.) and VOICING parameter settings (except for the MONO
CHN. and WAIT ALL modes) and while the cursor is at the lower line, select the part (L2, L1, H1 or H2)
using the Cursor buttons and then press the BYPASS button to make only the sound of that part to be
sent to the output.
While in SOLO mode, the BYPASS LED will flash. The SOLO mode is released when the cursor is
moved up to the upper line or the BYPASS button is pressed again.
GLOBAL Parameters
They are the parameters that set the DecaBuddy itself. They include the parameters of MIDI
SYSTEM to set the MIDI channels, COPY PROGRAM, NAME, TUNE ADJUST, etc.
MASTER LVL (Level)
Sets the output level of each program.
NAME
Changes the name of the program. Move the cursor using the Cursor buttons and enter the name
using the BANK/DATA control. To erase the letter, press the EXECUTE/STYLE EDIT button. To
insert the letter, press the BYPASS button.
MIDI SYSTEM
Move the cursor to the lower line and switch the parameter using the Cursor buttons.
[Base]
Sets the MIDI channel of the DecaBuddy itself.
[ID]
Sets the ID number of the DecaBuddy. The DecaBuddy can transmit/receive the System
Exclusive data to/from the external MIDI devices. When the multiple number of DecaBuddy is
used simultaneously, this ID number distinguishes each DecaBuddy in transmitting/receiving
the System Exclusive data.
[OUT]
THRU: The MIDI input signal from the MIDI IN terminal is routed through to the MIDI OUT
terminal.
EDIT Mode
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 42 43

Comments to this Manuals

No comments