Akai HV 10 Operator's Manual download pdf (Page 25)

When the Base channel in MIDI SYSTEM is set to channel 1, each harmony part can be controlled by

setting the sequence data as follows.

(Example)

Track1 (2ch) > Harmony L2 (2ch)

Track2 (3ch) > Harmony L1 (3ch)

Track3 (4ch) > Harmony H1 (4ch)

Track4 (5ch) > Harmony H2 (5ch)

When the Base channel in MIDI SYSTEM is set to channel 15, each harmony part can be controlled

by setting the sequence data as follows.

(Example)

Track1 (16ch) > Harmony L2 (16ch)

Track2 (1ch) > Harmony L1 (1ch)

Track3 (2ch) > Harmony H1 (2ch)

Track4 (3ch) > Harmony H2 (3ch)

Note: Each channel receives the single note information only. No chord is received.

WAIT ALL

Unlike the MONO CHN. mode, the harmony is generated receiving the MIDI note information on a

single MIDI channel. It generates the harmony when it receives the same number of notes as the

number of harmony part set to ON (except for the original voice) at BUDDIES parameter (refer to

VOICE parameters). As this allows the player to decide which part to play which harmony, the

sophisticated harmonies can be assigned in real time, but it always requires the entry of designated

number of MIDI note chords.

Note: The MIDI channels of the DecaBuddy and the external MIDI device that transmits the MIDI

information must be set the same (refer to MIDI SYSTEM in GLOBAL parameter).

Here, we use the PROGRAM A in BANK47 to explain editing the WAIT ALL Program.

Select the PROGRAM A in BANK47 ([47A Wait 4] displayed on screen) using the BANK/DATA control

and PROGRAM A button.

1. Press the EDIT button. Confirm that the lower line of the screen shows [WAIT ALL]. (If not, press

the < button to move the cursor down to the lower line of the screen and then select [WAIT ALL]

using the BANK/DATA control. Press the EDIT button to move the cursor up to the upper line of the

screen.)

2. Select the [BUDDIES] parameter using the BANK/DATA control. The lower line of the screen

shows [ , , , , ].

3. Press the < button to move the cursor down to the lower line of the screen.

4. Change the parameter referring to the following examples and sing into the microphone playing

the external MIDI keyboard.

✽ The ORIGINAL VOICE: ON/OFF setting in BUDDIES parameter is irrelevant to the harmony

settings.

EDIT Mode

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 42 43

No comments

Akai HV 10 Operator's Manual Page 25