Akai HV 10 Operator's Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 43
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
12
3. Select CHORD parameter using the BANK/DATA control.
4. Press the < button to move the cursor down to the lower line of the screen.
5. Select [01 Normal] using the BANK/DATA control.
6. Press the EDIT button to move the cursor up to the upper line of the screen.
7. Select [VOICING] parameter using the BANK/DATA control. The lower line of the screen shows
[UN, UN, - -, UN, UN].
8. Press the < button to move the cursor down to the lower line (L2) of the screen.
9. Change [UN] to [HI] using the BANK/DATA control.
10. Press the > button to move the cursor to L1 and change [UN] to [HI].
11. Similarly, change [UN] at H1 and H2 to [LO].
Try singing into the microphone again. You can hear the different harmony from the one you heard
before editing. Up to this point, the harmony voices of 2 higher harmonies and 2 lower harmonies
are added to the original voice.
In CHORD mode, the rule in STYLE mode, i.e. L2 and L1 are being the lower harmonies and H1 and
H2 being the higher harmonies to the original voice, does not apply.
The higher harmony is added to the original voice when [HI] is selected in VOICING, and the lower
harmony is added to the original voice when [LO] is selected. For example, when [HI] is set to L2, L1,
H1 and H2, all harmonies added are higher than the original voice. Similarly, when [LO] is set to L2,
L1, H1 and H2, all harmonies added are lower than the original voice. The added harmony notes
depend on the CHORD selected.
When [UN], [L8] or [H8] is selected in VOICING parameter, the harmony notes of Unison (UN), 1
Octave Down (L8) and 1 Octave Up (H8) are added regardless of the CHORD.
Editing the CHORD
There are two ways to edit the CHORD.
(1) Editing CHORD from CHORDS parameter
1. In EDIT mode, select CHORDS parameter using the BANK/DATA control.
2. Press the < button to move the cursor down to the lower line of the screen.
3. Select the CHORD to edit using the BANK/DATA control.
4. Press the EXECUTE/STYLE EDIT button to switch it to the CHORD EDIT screen.
5. Using the Cursor buttons and BANK/DATA control, specify the harmonies (L2, L1, H1 and H2) to
the original voice (ORIGIN) for the entire octave.
Not like in STYLE EDIT, all harmony parts are edited simultaneously.
(2) Editing CHORD from VOICING parameter
1. In EDIT mode, select VOICING parameter using the BANK/DATA control.
2. Press the < button to move the cursor down to the lower line of the screen.
3. Select the harmony part to edit using the Cursor buttons.
4. Press the EXECUTE/STYLE EDIT button to switch it to the CHORD EDIT screen.
5. Using the Cursor buttons and BANK/DATA control, specify the harmonies (L2, L1, H1 and H2) to
the original voice (ORIGIN) for the entire octave.
In editing the CHORD from the VOICING parameter, it is not possible to edit the [UN], [L8] or [H8]
selected harmony part. To edit all harmony parts, either change them all to [LO] or [HI] before
EDIT Mode
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

Comments to this Manuals

No comments