Akai HV 1 Operator's Manual download pdf (Page 4)

Duo Buddy HV1

WARNING

CAUTION (Only for the product sold in Canada and U.S.A.)

To prevent electric shock, do not use this polarized AC power plug with an extension cord,

receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure.

14-En

ATTENTION

Afin d’éviter tout risque de décharge électrique, n’ utilisez pas cette prise polarisée avec une

rallonge, une prise de courant ou autre sortie á moins que les lames puissent être complétement

insérées et qu’elles ne soient plus visibles.

14-F

IMPORTANT (for U.K. customers only)

This equipment is fitted with an approved converter plug.

To change the fuse in this type of plug proceed as follows:

1) Remove the fuse cover and old fuse.

2) Fit a new fuse which should be a BS1362 5 Amp A.S.T.A. or BSI approved type.

3) Refit the fuse cover.

If the AC mains plug fitted to the lead supplied with this equipment is not suitable for your type of

AC outlet sockets, it should be changed to an AC mains lead, complete with moulded plug of the

appropriate type.

If this is not possible, the plug should be cut off and a correct one fitted to suit the AC outlet. This

should be fused at 5 Amps.

If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

PLEASE NOTE: THE SEVERED PLUG MUST BE DESTROYED TO AVOID A POSSIBLE

SHOCK HAZARD SHOULD IT BE INSERTED INTO A 13 AMP SOCKET

ELSEWHERE.

The wires in this mains lead are coloured in accordance with the following code:

BLUE —NEUTRAL

BROWN —LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, please proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with

the letter L or coloured RED.

DO NOT CONNECT ANY WIRE TO THE PIN MARKED E OR

OR COLOURED GREEN

OR YELLOW & GREEN WHEN WIRING THE PLUG.

Ensure that all the terminals are securely tightened and no loose strands of wire exist.

Before replacing the plug cover, make certain the cord grip is clamped over the outer sheath of

the lead and not simply over the wires.

6F-En

1 2 3 4 5 6 7 8 9 ... 21 22

No comments

Akai HV 1 Operator's Manual Page 4