Akai HV 1 Operator's Manual download pdf (Page 3)

Duo Buddy HV1

WARNING

The HV1 is designed to be used in a standard household environment.

Power requirements for electrical equipment vary from area to area. Please ensure that your AC

Adaptor supplied meets the power requirements in your area. If in doubt, consult a qualified

electrician or AKAI professional dealer.

120 VAC @ 60 Hz for USA and Canada

220~230 VAC @ 50 Hz for Europe

PROTECTING YOURSELF AND THE HV1

• Never touch the AC Adaptor with wet hands.

• Always disconnect the AC Adaptor from the power supply by pulling on the adaptor/plug,

not the cord.

• Allow only an AKAI professional dealer or qualified professional engineer to repair or

reassemble the HV1. Apart from voiding the warranty, unauthorized engineers might touch

live internal parts and receive a serious electrical shock.

• Do not put, or allow anyone to put any object, especially metal objects, into the HV1.

• Use only a household AC power supply. Never use a DC power supply.

• If water or any other liquid is spilled into or onto the HV1, disconnect the power, and call your

dealer.

• Make sure that the unit is well-ventilated, and away from direct sunlight.

• To avoid damage to internal circuitry, as well as the external finish, keep the HV1 away from

sources of direct heat (stoves, radiators, etc.).

• Avoid using aerosol insecticides, etc. near the HV1. They may damage the surface, and may

ignite.

• Do not use denaturated alcohol, thinner or similar chemicals to clean the HV1. They will

damage the finish.

• Modification of this equipment is dangerous, and can result in the functions of the HV1 being

impaired. Never attempt to modify the equipment in any way.

• Make sure that the HV1 is always well-supported when in use on a firm level surface.

• In order to assure optimum performance of your HV1, select the setup location carefully, and

make sure the equipment is used properly. Avoid setting up the HV1 in the following

locations:

1. In a humid or dusty environment

2. In a room with poor ventilation

3. On a surface which is not horizontal

4. Inside a vehicle such as a car, where it will be subject to vibration

5. In an extremely hot or cold environment

1 2 3 4 5 6 7 8 ... 21 22

No comments

Akai HV 1 Operator's Manual Page 3