Akai MPC5000 User Manual download pdf (Page 7)

 PAD MUTE

To turn on Pad Mute Quantization, do the following:

01. Press the [TRACK MUTE] Button

This will open the TRACK MUTE Page.

02. Press the [F3] (PdMUTE) button to select the PAD MUTE Tab.

03. Press the [F5] (T.C.) button.

The [F5] button will darken to indicate it is active as shown on the right.

04. Press a pad you would like to mute.

The MPC5000 will mute the selected pad on the next division of the T.C. setting.

Tip: For more information on Pad Mute, see page 81 of the MPC5000 Reference Manual.

For more information on Timing Correct, see page 24 of the MPC5000 Reference Manual.

 Changing the Timing Correct for Pad / Track Mute Quantization

To change the Timing Correct value while in TRACK or PAD MUTE Mode,

press the [WINDOW] Button. This is separate from the MAIN Timing

Correct, and is used exclusively for Pad / Track Mute. The following

divisions are available:

2 Bar

1 Bar

1/4

1/4(3)

1/8

1/8(3)

1/16

Change Sequences in Track Mute Mode

The ability to change sequences when in TRACK MUTE Mode has been added. To change Sequences in TRACK MUTE Mode,

do the following:

05. Press the [TRACK MUTE] Button

This will open the TRACK MUTE Page as shown on the right.

06. Press the [F1] (TkMUTE) button to select the TRACK MUTE Tab.

07. Select the 'SQ' field.

08. Press the [+] / [-] buttons or turn the [DATA] wheel to select the

next sequence.

The next sequence to be played will be indicated with an '>' as shown on the

right. The Sequence will change to the selected sequence at the end of the

current sequence.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Akai MPC5000 User Manual Page 7