Akai MPC5000 Specifications download pdf (Page 98)

Functions of a Pad 84

02. Press the [F3] (PdMUTE) button to select the PAD MUTE Tab.

03. Press the [F5] (T.C.) button.

The [F5] button will darken to indicate it is active as shown on the right.

04. Press a pad you would like to mute.

The MPC5000 will mute the selected pad on the next division of the T.C. setting.

 Changing the Timing Correct for Pad Mute Quantization

To change the Timing Correct value while in TRACK or PAD MUTE Mode, press the [WINDOW] Button. This is separate

from the MAIN Timing Correct, and is used exclusively for Pad / Track Mute. The following divisions are available:

2 Bar

1 Bar

1/4

1/4(3)

1/8

1/8(3)

1/16

Off

Selecting a Sequence to Play with Pads

You can select a sequence that you wish to play next, by hitting the pads.

This is useful for live performances, which change a song structure in real

time. Also, you can check the relationship between sequences while you

are working on a song with several short sequences.

Pressing the [NEXT SEQ] button brings up the next sequence page.

'Now' Field

Like the 'Now' field in the MAIN page, it displays the current time position

of the sequence.

'Sequence' Field

Like the 'Sequence' field in the MAIN page, you can select a sequence in this field.

Sequence List

The sequence list is displayed under the 'Now' field and the 'Sequence' field.

The sequence list displays the first 8 letters of the sequence name. The sequences are displayed according to the

position of the pads; Sequence 1 on the lower left and sequence 16 on the upper right.

You can display 16 pads at one time, allowing you to display 1 to 64 sequences by switching pad banks.

Note: you cannot select a sequence between 65 and 99 using pads, but you can select them in the 'Sequence' field.

 Operation

01. In the 'Sequence' field, select a sequence that you wish to play

first.

02. Start to play back the Sequence.

03. Select another sequence that you wish to play next, using a

pad.

The number and name of the selected sequence will be displayed below the

Sequence list as shown in the image to the right. The MPC5000 will switch to the

next sequence after it plays the current sequence to the end.

Tip: You can change the next sequence by hitting the pads until the current sequence ends.

Tip: When no other sequence is selected, the MPC5000 will continue to playback the current sequence over and over.

Tip: You can cancel the next sequence that is displayed below the sequence list, by pressing the [F6] (CLEAR) button.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 221 222

Comments to this Manuals

No comments

Akai MPC5000 Specifications Page 98

Comments to this Manuals

Related products and manuals for Musical Instruments Akai MPC5000