Akai EWI 4000S Specifications download pdf (Page 24)

 Adjusting the Reverb Effect Volume of Each Program

This procedure adjusts the volume of the Reverb effect for each Program individually, as opposed to the

overall Reverb effect volume. The Reverb effect volume of each program is stored in the EWI4000s.

1. Select the program whose Reverb effect volume you want to adjust.

2. While holding the FX BUTTON, press the SETUP BUTTON. While pressing

both these buttons, “rb” will be shown in the PROGRAM / DATA DISPLAY.

3. Release both buttons. The current Reverb effect volume of the selected

program will be displayed.

4. Adjust the Reverb effect volume by pressing the HOLD BUTTON (which increases the volume value) or

OCTAVE BUTTON (which decreases the volume value).

5. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.

 Adjusting the Delay Effect Volume of Each Program

This procedure adjusts the Delay effect volume for each Program. The Delay effect volume setting of each

program is stored in the EWI4000s.

1. Select the program you wish to adjust the Delay effect volume.

2. While holding the FX BUTTON, press the SETUP BUTTON. While pressing both these buttons, “rb”

will be shown in the PROGRAM / DATA DISPLAY.

3. While pressing the SETUP BUTTON, release the FX BUTTON, then press the

HOLD BUTTON so the PROGRAM / DATA DISPLAY now shows “dL.”

4. Release the SETUP BUTTON and HOLD BUTTON. The current Delay volume

of the selected Program will be displayed.

5. Adjust the Delay volume by pressing the HOLD BUTTON (which increases the volume value) or

OCTAVE BUTTON (which decreases the volume value).

6. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.

 Adjusting the Chorus Effect On/Off on Each Program

This procedure selects whether the Chorus effect is set on or off for each Program. The Chorus effect

setting of each Program is stored in the EWI4000s.

1. While holding the FX BUTTON, press the SETUP BUTTON. While pressing both these buttons, “rb”

will be shown in the PROGRAM / DATA DISPLAY.

2. While pressing the SETUP BUTTON, release the FX BUTTON, then press the

HOLD BUTTON so the PROGRAM / DATA DISPLAY now shows “CH.”

3. Release the SETUP BUTTON and HOLD BUTTON. The current Chorus setting

of the selected program will be displayed.

4. Set the Chorus to either “on” or “OF” by pressing the HOLD BUTTON or OCTAVE BUTTON.

5. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

No comments

Akai EWI 4000S Specifications Page 24