Akai EWI 4000S Owner's Manual download pdf (Page 19)

A Quick Tour of UniQuest For EWI 4000s

UniQuest for EWI 4000s 19 of 44

BREATH THRESH

• Range is 0 to 100%. This is the threshold level above which the Oscillator will

begin sounding.

BREATH CURVE

• Range is -50% to +50%. This parameter sets the mapping of breath pressure to

output volume for this oscillator. 0% means a linear 1:1 mapping as follows:

Oscillator Master Volume Parameters

LEVEL

• Range is 0% to 100%. This parameter sets the master volume of the Oscillator it

belongs to.

Oscillator X-FADE Parameter

X-FADE

• Range is OFF or ON. This parameter is only effective when the BREATH

THRESHOLD parameter of OSC2 is set to a non-zero value. When enabled, this

parameter causes OSC 1 to be decreased in volume for breath pressure levels

above the OSC 2 BREATH THRESHOLD:

In the example shown here, both oscillators are set to use linear breath curves, with

OSC 1 and OSC 2 set to breath thresholds of 0% and 20% respectively.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

No comments

Akai EWI 4000S Owner's Manual Page 19