Akai MPC User's Guide Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
78
Record Control Section
The Record Control section offers all the relevant controls for recording.
Threshold
In Record Mode, the software automatically starts recording when the level of the incoming
source exceeds the Threshold (Thresh). If you set the threshold too high, the recording may
not start when you play the input source, or the start of the material you wanted to record
may be missing. If you set the threshold too low, the recording may start too early, before
you play the external source. Set this parameter to an appropriate level using the level
meter.
Use Q-Link Knobs Q3 and Q4 to define the maximum sampling time. You can record up to
20 minutes and 59 seconds. We recommend setting these to values that roughly match your
estimated recording duration.
Click the Reset Peak button to reset the "peak hold", which shows the highest level of your
input signal as a red bar within the level meter.
Record Arm Channels
Use the Record Arm buttons to define which side of the incoming audio signal is
going to be recorded. You can select L for the left channel, R for the right channel
or both buttons for stereo recording.
Tip: Deselect the right channel when you are recording to one channel only.
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 147 148

Comments to this Manuals

No comments