37
MPC 1000 v4 Operator’s Manual rev 3.5
For the new OS, JJ reworked the le browser of the
LOAD/ SAVE section, providing a better overview of
the folder structure on your HDD or CF Card. Also,
a few nice additions were made.
For example, the USB functionality was improved
by adding a mount feature, so you don’t have to
remove and re-insert the USB cable again to mount
the device. Also, a feature to assign samples to pads
on load was added, and Auto Load settings can now
be accessed and changed more easily.
n Assigning samples to Pads on load:
01.
02.
03.
04.
05.
06
Press [MODE] + [PAD 2] (LOAD).
Press [WINDOW] to bring up the Options menu.
Turn on ‚Sample assign to pad Window’ with the DATA
wheel.
Press [CLOSE] (F4).
Load a Sample: in the ‚Load’ eld, select the device you
want to load your sample from (MEMORY CARD, HARD
DISK or INTERNAL).Next, move the cursor to the right
into the le browser. To enter a folder press . Select a
sample and press [DO IT] (F6).
A dialog to assign the sample to a pad appears. Use the
DATA wheel to scroll through the pads. Press [YES] (F5)
to assign it. DONE.
01.
02.
03.
04.
Press [MODE] + [PAD 2] (LOAD).
Press [WINDOW] to bring up the Options menu.
Press [FORMAT] (F2). A warning message appears.
To format the HDD/ CF Card, press [DO IT] (F5). The
formatting procedure starts.
n Formatting a Hard Disk or Compact Flash Card:
BEWARE: You will lose all DATA on your Hard Disk
or CF Card if you do this!!!
NOTE: If you're changing over from AKAI to the JJ OS,
reformatting the HDD and CF Card is recommended
to avoid the infamous directory errors!
F1 F2 F3 F4 F5 F6
Press [WINDOW]...
Load a sample...
...and assign it.
n Reworked File Browser
J
J
Comments to this Manuals