Akai MPC1000 Operator's Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
28
MPC 1000 v4 Operator’s Manual rev 3.5
Chapter 6: Grid Edit Mode (DRUM/ MIDI/ AUDIO)
One of JJ’s biggest accomplishments for the new OS
was to bring the Grid Edit Mode feature from the
MPC 2500 to the 1000.
With Grid Edit, you can enter pad events into a
graphic matrix representing a track. Each track in the
MPC 1000 stores the performance data you entered
with the pads or a MIDI Controller: Drum pad
events, MIDI note information from external MIDI
devices and Audio data from direct recordings. Not
enough that JJ implemented the Grid Edit Mode into
the MPC 1000, he also managed to make use of the
Q-Link Sliders inside it.
e Grid Edit consists of three modes, each having
its own look depending on the track type you choose:
DRUM mode, MIDI mode and AUDIO mode. Each
of these modes has two views: 6Pad and 16Pad. In
6Pad view (which is the default), you can only see the
events of 6 dierent pads at once, but you also have
control over other functions like tempo, sequence,
programs, velocity, and the length of the current
event (this depends on the state of the machine; if its
set to playback or recording mode). e Grid Edit
Mode is basically divided into two segments: one is
the Grid itself, where you can record, edit and move
events. e second one is the line above the grid,
where you can set and change various parameters in
6Pad Mode.
Although the Grid Edit Mode looks complicated at
rst, you pick up the ins and outs very quickly, once
you start working with it. People who are familiar
with Fruity Loops will probably know whats going
on here. Next, well take a look at the displays of the
Grid Edit as well as all controls you need (and there
are many) to fully utilize the Grid Edit Mode!
e following sections describe how to utilize the
full potential of Grid Edit. We will have a look at the
dierences between 6Pad and 16Pad mode, the most
important controls, the Drum, MIDI, and Audio
Grid, and nally, the usage of the Q-Link Sliders
inside Grid Edit will be covered.
n 6Pad view and 16Pad view (DRUM Grid)
16Pad view
In Grid Edit, you can switch between 6Pad and 16Pad
view by pressing [F3].
e 16Pad view provides a good overview of all
Pads. But in this mode you dont have as many editing
possiblities as in 6Pad mode, because the line with
all the extra info above the grid is missing due to the
small size of the display. Its a nice feature to see all
events inside the grid, but for precise work, 6Pad
Mode is recommended.
e 6Pad Mode – as the name says – only displays
6 pads at once. But the good thing is, you can select
these pads! Move the cursor to the Pad number eld
and hit the Pad you want to have displayed (or turn
DATA wheel). Move the cursor down to select other
Pads. Be aware that the personalized pad setup is only
saved for tracks 1 to 8!
Pad number
6Pad view
n Controls in Grid Edit Mode
Inside Grid Edit Mode, you can control almost every
single parameter of an event. But in order to be able
to access to all these features and controls, some
buttons have secondary functions linked to them,
which dier a) depending on the selected grid edit
type and b) the current state of the machine (whether
it's in record or playback mode).
On the next page, you'll nd a list of all the key
combinations used inside the three Grid Edit modes,
so you won't get lost.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 48 49

Comments to this Manuals

No comments