Akai MPC1000 Operator's Manual download pdf (Page 12)

MPC 1000 v4 Operator’s Manual rev 3.5

n Assigning Tempo Change to Q-Link Sliders

01.

02.

03.

04.

05.

06.

TIP: Use a large bpm range for playing around with

the tempo until you nd a matching one for your track,

and a smaller range for ne-tuning a loop or similar.

NOTE: From the Tempo Change screen, you can also

access the Step Edit Mode by pressing [EDIT] (F2).

For details about Step Edit, please refer to the original

AKAI manual!

Highlight the BPM counter and press [WINDOW] to

enter the Tempo Change screen.

Turn Tempo Change 'ON' using the DATA wheel.

In the 'Q-Link' column, select Slider 1 or 2.

In 'Q-Link Range', set the width of the range in which

the original tempo will vary. In this example, the original

tempo of 84 BPM can be changed from 42 BPM (50%

of the original tempo) up to 168 BPM (200 % of the

original tempo).

Press 'Close' (F4) to save your settings. Back on the

MAIN screen, a second BPM indicator will appear below

the original, displaying 'Q1' or 'Q2' and the actual

tempo of the sequence.

Play back the sequence and use the selected Q-Link

slider to adjust the tempo.

NOTES::..

_______________________________________________________________________

F1 F2 F3 F4 F5 F6

Options in MAIN screen: Tempo Change / Step Edit

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

No comments

Akai MPC1000 Operator's Manual Page 12