Akai MPC1000 Operator's Manual download pdf (Page 21)

If you set the end point “002.01.00” like this,

the area right before the end point will be

included in the area.

04. In the Erase field, select NOTE ONLY.

Note field will open up.

05. Select the Note field.

If you wish to delete all events, leave it as ALL.. To delete only events on a specific pad, hit the pad to

delete. You can select several pads. If you hit a different pad by mistake, you can cancel the selection by

hitting the pad again. To restart the pad selection, turn the DATA wheel to the left. The value in the Note field

will be reset to ALL so that you can select pad from the beginning.

06. Press [F5] (DO IT) key.

The operation starts and the events of the selected pad within the selected area will be deleted.

Tips: When you delete events with the Erase field set to ALL EVENT, the MPC1000 will delete other events in

the selected area as well as pad events. When you delete events with the Erase field set to EXCEPT Note,

the MPC1000 will delete the other events other than the pad events in the selected area.

Timing correct feature

When recording a pad performance, it is hard to play the pads to the tempo. By using the timing correct feature,

you can correct the timing of the pad event you recorded by hitting pads. There are two ways to use this feature:

by correcting the timing in real time during the recording, and by correcting the recorded event after the

recording.

Real time timing correction

You can correct the timing real-time during the recording.

01. When a sequence is stop, press [F1] (T.C.) key in the MAIN page.

The Timing Correct window will open up.

02. In the Note value field, set the value for timing correction.

For example, if you set “1/16”, each position of the performance data will be moved to the nearest 1/16 note.

You can set the Note values as follows.

1/8 = 1/8 note, 1/8(3) = 1/8 note triplets, 1/16 = 1/16 note, 1/16(3) = 1/16 note triplets, 1/32 = 1/32 note,

1/32(3) = 1/32 note triplets, OFF = NO timing correction.

Swing feature

You can set the swing value in the Swing% field. With the swing feature, the even numbered events set in the

Note value field will be off the rhythm according to the value in the Swing% field. With this feature you can create

the shuffle groove.

03. Press [F4] (CLOSE) key.

It closes the window.

Note: If you press [F5] (DO IT) key, the MPC1000 will correct the timing of the recorded data.

Tips: If you press [F1] (T.C.) key during recording/playback, a small Timing Correct window will be displayed while

you are holding the key. You can use the Note value field of this window to change the value for timing

correction. It makes it easier to change the value during the recording.

Sequence feature

-13-

002.01.00

001.04.95001.04.94 002.01.01001.04.93

EVENT EVENT EVENT EVENT EVENT

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 103 104

Comments to this Manuals

No comments

Akai MPC1000 Operator's Manual Page 21

Comments to this Manuals

Related products and manuals for Musical Equipment Akai MPC1000