Akai DPS12 Operator's Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
38
Chapter 2: Recording on the DPS12
TIP :
You can use the transport functions and the locate function in Mixer mode in the same way as in
Main mode and Track View mode. With the MIXER screen displayed, you can set the mix parameters while
playing the tracks.
6. In the same way, set the other mix parameters and the parameters for other channels.
TIPS :
Refer to “Chapter 6: Mixer Function (Mixer mode)” on page 58 for more information on Mixer mode.
You can store a set of mix parameter settings in Mixer mode as a scene. For more information, see
page 69.
Completing the operation on the DPS12
Follow the steps below to turn off the power to the DPS12 and connected peripheral devices after you finish
recording or mixdown.
1. Press the eject button of the JAZ drive to eject the JAZ disk.
CAUTION :
Be sure to eject a JAZ disk from the JAZ drive before you turn off the power to the DPS12.
If you turn off the power to the DPS12 while a JAZ disk is inserted in the drive, the disk may be damaged.
2. Turn off the power to the devices in the following order: monitor system DPS12 peripheral
devices, such as a tone generator, SCSI device, etc.
TIPS :
All track audio data and setup data for the Project you were just working on is automatically stored on
the JAZ disk (or the external hard disk).
AKAI recommends that you back up important Projects to an external SCSI device or DAT recorder. For
more information, see page 99.
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 155 156

Comments to this Manuals

No comments