Akai DPS12 Operator's Manual download pdf (Page 133)

121

Chapter 13: Using the effects

5. If necessary, move the cursor to the parameter you wish to adjust in field 2, and turn the [JOG] dial

to set the value.

✐

TIPS :

• The parameters of some effect types are displayed over two screens. In this case, press the

[F6]

key

in the first screen to recall the second screen. Press the

[F6]

key to return to the first screen.

• Some effect types require you to switch between different effects manually. If you have selected one of

these types, use the

[F6]

key to switch the effects.

6. Press the [F5] key to complete the effect settings and return to normal Mixer mode.

Using effect return signals as analog inputs

You can use the effect return signals from EFFECT A and B as analog inputs 3–6 in Assign mode so that they can

be input to the mixer section. Follow the steps below.

1. While the transport section is stopped, press the [ASSIGN] key to recall Assign mode.

2. Press the [F1] key.

The following screen appears.

3. Turn the [JOG] dial and select or for the method by which

to switch analog inputs to effect return signals.

There are three options for this field as follows.

➸

NOTE :

Depending on the EFFECT RETURN setting, the indication on the THRU screen and the

SOURCE screen will change.

If you have selected for the field, changes to

and changes to in the THRU screen. Also in the SOURCE screen,

changes to and changes to .

If you have selected for the Return select field, changes to

, changes to , to , and

to in the THRU screen. Also in the SOURCE screen, changes to

, changes to , to , and

to .

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 155 156

No comments

Akai DPS12 Operator's Manual Page 133