Akai ATW2810PF Operations Instructions download pdf (Page 19)

18

Connecting external

equipment

Headphones (optional)

The headphones must have an impedance of

between 8 and 32 ohms and have a 3.5 mm

stereo jack plug.

Plug the headphone jack into the headphone

socket of the TV.

Connecting a video

recorder

Plug one end of the SCART lead (not

supplied) into the back of the video recorder

and the other end into one of the SCART

sockets on the back of the TV.

Switch on the video recorder and the TV.

Press the AV button on the remote

control to select AV1, AV2 or AV3

(optional) to

correspond with

SCART socket you

are using on the

back of the TV.

Via SCART

Make sure the TV and video recorder are

both switched off.

AV

Make sure the TV and video recorder are

both switched off.

Plug one end of the RCA lead into the video

and audio out sockets on the back of the

video recorder and plug the other end into

the video and audio in sockets of the TV.

If the sound is in mono use the Audio Input

L. In the SOUND menu select MONO.

Press the AV button repetitively

and select the AV3 mode by two

scart models or select AV4 mode

by three scart models.

Via RCA lead (optional)

AV

Please note:

You can connect a RGB external equipment

via Scart 1. It is necessary to you use full

Scart cable for this purpose.

Select the video outputs of external device

by using its menu to RGB if it’s available.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Comments to this Manuals

No comments